D-Link DWC-2000 - WIDS

65
4
agent
The IP address of the SNMP agent.
IP address
AAA.BBB.CCC.DDD
where each part is in the
range 0-255
5
subnet_mask
The network mask used to determine the
list of allowed SNMP managers. To allow
any IP on the network to manage the
device, enter 255.255.255.0. For a
specific host, enter 255.255.255.255. To
allow global access, enter 0.0.0.0.
IP address
AAA.BBB.CCC.DDD
where each part is in the
range 0-255
6
accessType
Which SNMP trap port that the trap
messages will be sent to.
SNMP access type for
SNMP community.
7
community
The community string to which the agent
belongs. Most agents are configured to
listen for traps in the Public community.
String
4.18 system snmp access edit <rowid>
S.No
Command
Name
Description
Type and Description
1
<rowid>
SNMP configuration mode.
Unsigned integer.
2
save
Save SNMP access control configuration
changes.
3
exit
Save SNMP access configuration
changes and exit current mode.
4
cancel
Roll back SNMP configuration changes.
5
agent
The IP address of the SNMP agent.
IP address
AAA.BBB.CCC.DDD
where each part is in the
range 0-255
6
subnet_mask
The network mask used to determine the
list of allowed SNMP managers. To allow
any IP on the network to manage the
device, enter 255.255.255.0. For a
specific host, enter 255.255.255.255. To
allow global access, enter 0.0.0.0.
IP address
AAA.BBB.CCC.DDD
where each part is in the
range 0-255
7
accessType
Which SNMP trap port the trap messages
will be sent to.
SNMP access type for
SNMP community
8
community
The community string to which the agent
belongs. Most agents are configured to
listen for traps in the Public community.
String