D-Link DWC-2000

63
allow the IP to grant access to a
particular machine.
IP address AAA.BBB.CCC.DDD
where each part is in the range 0-
255
7
to_address
Set the Ending IP in case of
range.
IP address AAA.BBB.CCC.DDD
where each part is in the range 0-
255
4.13 system snmp trap configure <agent_ip>
S.No
Command
Name
Description
Type and Description
1
<agent_ip>
SNMP trap configuration mode.
IP address
AAA.BBB.CCC.DDD where
each part is in the range 0-255
2
save
Save SNMP trap configuration
changes.
3
exit
Save SNMP trap configuration
changes and exit current mode.
4
cancel
Roll back SNMP configuration
changes.
5
agent
The IP address of the SNMP agent.
IP address
AAA.BBB.CCC.DDD where
each part is in the range 0-255
6
snmp_version
Snmp Version v1/v2/v3
String
7
port
Which SNMP trap port the trap
messages will be sent to.
Port number
8
community
The community string to which the
agent belongs. Most agents are
configured to listen for traps in the
Public community.
String
4.14 system snmp trap delete <agent_ip>
S.No
Command
Name
Description
Type and Description
1
<agent_ip>
Delete a SNMP trap
configuration.
IP address AAA.BBB.CCC.DDD where
each part is in the range 0-255
4.15 system snmp users configure <user>
S.No
Command Name
Description
Type and Description
1
<user>
SNMP v3 User list configuration
changes.
SNMPv3 user list type.