D-Link DWC-2000

75
24
lan cos-to-dscp-
remarking configure
Disables CoS to DSCP remarking.
6.2 qos lan enable
S.No
Command Name
Description
Type and
Description
1
lan status
Displays the status of LAN QoS.
2
lan enable
Enables QoS on LAN.
3
lan disable
Disables QoS on LAN.
4
lan trustmode
Configures the trust mode
configuration in the controller.
5
lan trustmode status
Shows the trust mode configuration
on the controller.
6
lan trustmode cos
Configures CoS based QoS for a
controller port.
7
lan trustmode dscp
Configures DSCP based QoS for a
controller port.
8
lan cos-map
Configures a CoS map for the
controller port.
9
lan trustmode cos enable
Configures a trust mode CoS based
QoS for LAN.
10
lan trustmode dscp
enable
Configures trust mode as DSCP QoS
for LAN.
11
lan cos-map show
Shows the CoS map for the LAN.
12
lan cos-map configure
Configures CoS map for QoS.
13
lan dscp-map
Configures the DSCP map for a
controller.
14
lan dscp-map show
Displays DSCP priority mapping on a
controller.
15
lan dscp-map configure
Configures DSCP map for QoS.
16
lan cos-to-dscp-
remarking enable
Enables CoS to DSCP remarking.
17
lan cos-to-dscp-
remarking disable
Disables CoS to DSCP remarking.
18
lan queue
Queue scheduling and management
configuration.
19
lan queue management
LAN queue management
configuration.
20
lan queue management
show
Shows a queue management
configuration.
21
lan queue scheduling-
algo
Configures a queue scheduling
algorithm.
22
lan queue scheduling-
algo set
Sets the queue scheduling algorithm
on the LAN.