D-Link DWC-2000

67
4.21 system traffic_meter configure
S.No
Command Name
Description
Type and
Description
1
save
Save traffic meter configuration
changes.
2
exit
Save traffic meter configuration
changes and exit current mode.
3
cancel
Roll back traffic meter configuration
changes.
4
enable
Enable/Disable the traffic meter.
Boolean choice.
5
limit_type
Set traffic Limit Type 0(No limit),
1(Download only), 2(Both Directions)
Traffic meter types.
6
monthly_limit
Set monthly limit for the traffic meter.
Unsigned integer.
7
increase_limit_enable
Enable/Disable whether you can
increase limit of the traffic meter.
Boolean choice.
8
increase_limit_by
Set a value for increasing the limit of
the traffic meter.
Unsigned integer.
9
counter
Set the traffic counter as either a
specific time or restart counter.
Traffic counter type.
10
time_hour
Set hours for restart time.
HH(00-23) using 24
hour clock
11
time_minute
Set minutes for restart time.
minute in the format
MM(00-59)
12
day_of_month
Set day of the month.
Calendar day of the
month.
13
send_email_report
Enable/Disable send email report.
Boolean choice.
14
block_type
Set block Traffic type 0(block all traffic)
1(block all traffic except email)
Block traffic type.
15
send_email_alert
Enable/Disable send email alert.
Boolean choice.
4.22 system usb usb1 configure
S.No
Command
Name
Description
Type and
Description
1
save
Save Configurable OPTION settings.
2
exit
Save configurable OPTION settings and exit
current mode.
3
cancel
Roll back Configurable OPTION settings