D-Link DWC-2000

78
configuration.
21
lan queue management
show
Shows queue management
configuration.
22
lan queue scheduling-
algo
Configures a queue scheduling
algorithm.
23
lan queue scheduling-
algo set
Sets the queue scheduling
algorithm on the LAN.
24
lan queue scheduling-
algo show
Shows the queue scheduling
algorithm on the LAN.
25
lan cos-to-dscp-
remarking configure
Disables CoS to DSCP remarking.
6.5 qos lan trustmode dscp enable <lanPort>
S.No
Command Name
Description
Type and
Description
1
<lanPort>
Configures DSCP on LAN, QoS has
to be enabled first.
Lan Port on the
controller
2
lan status
Displays status of LAN QoS.
3
lan enable
Enables QoS on LAN.
4
lan disable
Disables QoS on LAN.
5
lan trustmode
Configures trust mode configuration
on the controller.
6
lan trustmode status
Shows the trust mode configuration
in the controller
7
lan trustmode cos
Configures CoS based QoS on a
controller port.
8
lan trustmode dscp
Configures DSCP based QoS on a
controller port.
9
lan cos-map
Configures the CoS map on a
controller port.
10
lan trustmode cos enable
Configures trust mode CoS based
QoS on LAN.
11
lan trustmode dscp
enable
Configures trust mode as DSCP
QoS on LAN.
12
lan cos-map show
Shows the CoS map for the LAN.
13
lan cos-map configure
Configures CoS map for QoS.
14
lan dscp-map
Configures the DSCP map for LAN
the controller.
15
lan dscp-map show
Displays DSCP priority mapping on
the controller.
16
lan dscp-map configure
Configures a DSCP map for QoS.
17
lan cos-to-dscp-
remarking enable
Enables COS to DSCP remarking.