D-Link DWC-2000

49
2.28 wlan wids_security ap configure
S.No
Command Name
Description
Type and
Description
1
save
Save Wids Security settings.
2
exit
Save Configurable wids security
settings and exit current mode.
3
cancel
Roll back Configurable wids security
settings changes.
4
admin_config_rogue
Enable Rogue reporting for admin
configured Rogue AP's.
Boolean
choice
5
ap_chan_illegal
Enable or disable Rogue reporting for
AP's is operating on an illegal
channel.
Boolean
choice
6
ap_de_auth_attack
Enable or disable the AP de-
authentication attack.
Boolean
choice
7
fakeman_ap_chan_invalid
Enable or disable Rogue reporting for
fake managed AP's detected with an
invalid channel.
Boolean
choice
8
fakeman_ap_managed_ssid
Enable or disable Rogue reporting for
fake managed AP's detected with a
managed SSID.
Boolean
choice
9
fakeman_ap_no_ssid
Enable or disable Rogue reporting for
APs detected with no SSID.
Boolean
choice
10
managed_ap_ssid_invalid
Enable or disable Rogue reporting for
managed AP's detected with an
invalid SSID.
Boolean
choice
11
managed_ssid_secu_bad
Enable or disable Rogue reporting for
AP's detected with managed SSID's
and an invalid security configuration.
Boolean
choice
12
standalone_cfg_invalid
Enable or disable Rogue reporting for
standalone AP's operating with
unexpected configuration.
Boolean
choice
13
unknown_ap_managed_ssid
Enable or disable Rogue reporting for
unknown AP's detected with a
managed SSID.
Boolean
choice
14
unmanaged_ap_wired
Enable or disable Rogue reporting for
unmanaged AP's on a wired network
Boolean
choice
15
rogue_det_trap_interval
Configure the Rogue detected trap
interval.
Unsigned
integer
16
wired_detection_interval
Configure the wired network detection