D-Link DWC-2000 - Wlan Peer_Controller Configure; Wlan Peer_Controller Push_Configuration <Ipaddr

48
1
<macaddr>
wlan client
configuration mode.
MAC address AA:BB:CC:DD:EE:FF where
each part is in the range 00-FF
2.26 wlan peer_controller configure
S.No
Command Name
Description
Type and
Description
1
save
Save peer controller configuration
changes.
2
cancel
Roll back peer controller configuration
changes.
3
exit
Save peer controller configuration
changes and current mode.
4
enable_global
Enable/Disable global configuration push
to peer controllers.
Boolean choice
5
enable_discovery
Enable/Disable discovery configuration
push to peer controllers.
Boolean choice
6
enable_channel/power
Enable/Disable channel and power
configuration push to peer controllers.
Boolean choice
7
enable_ap_database
Enable/Disable AP database
configuration push to peer controllers.
Boolean choice
8
enable_device_location
Enable/Disable device location
configuration push to peer controllers.
Boolean choice
9
enable_ap_profile
Enable/Disable AP profile and network
configuration push to peer controllers.
Boolean choice
10
enable_known_client
Enable/Disable known client
configuration push to peer controllers.
Boolean choice
11
enable_captive_portal
Enable/Disable Captive Portal
configuration push to peer controllers.
Boolean choice
12
enable_radius_client
Enable/Disable RADIUS client
configuration push to peer controllers.
Boolean choice
13
enable_QoS_acl
Enable/Disable QoS ACL configuration
push to peer controllers.
Boolean choice
14
enable_QoS_diffserv
Enable/Disable QoS DiffServ
configuration push to peer controllers.
Boolean choice
15
enable_wds_group
Enable/Disable wds group configuration
push to peer controllers.
Boolean choice
2.27 wlan peer_controller push_configuration <ipaddr>
S.No
Command
Name
Description
Type and Description
1
<ipaddr>
Start the configuration push
for one peer controllers.
IP address AAA.BBB.CCC.DDD where
each part is in the range 0-255