38
Configure the stand-alone
AP expected security
mode.
Stand Alone AP Security Mode
Configure the stand-alone
AP expected wired network
mode.
Stand-alone AP expected wired
network mode
Configure fixed radio
channel/power settings.
Configure fixed radio
channel/power settings.
Configure a fixed channel
for the radio.
Configure a fixed transmit
power for the radio.
Range of power percentage
radio2-
802.11b/g/n
channel
Configure a fixed channel
for the radio.
Configure a fixed transmit
power for the radio.
range of power percentage
2.4 wlan ap_management ap_database delete <macaddr>
wlan ap-management ap-
database delete an mac-
address
MAC address AA:BB:CC:DD:EE:FF
where each part is in the range 00-FF
2.5 wlan ap_management rf_management configure
Save rf management configuration
changes.
Roll back configuration changes.
Save rf management configuration
changes and current mode.
Configure the channel plan parameters.
Configure the power plan parameters.
Specify radio frequency band.
Set the mode of channel plan
assignment.