D-Link DWC-2000

37
AP expected wired network
mode.
Stand-alone AP expected wired
network mode
14
radio1-802.11a/n
Configure fixed radio
channel/power settings.
15
radio2-
802.11b/g/n
Configure fixed radio
channel/power settings.
16
radio1-802.11a/n
channel
Configure a fixed channel
for the radio.
Unsigned integer
17
radio1-802.11a/n
power
Configure a fixed transmit
power for the radio.
Range of power percentage
18
radio2-
802.11b/g/n
channel
Configure a fixed channel
for the radio.
Unsigned integer
19
radio2-
802.11b/g/n
power
Configure a fixed transmit
power for the radio.
Range of power percentage
2.3 wlan ap_management ap_database edit <macaddr>
S.No
Command Name
Description
Type and Description
1
<macaddr>
wlan ap-management ap-
database configuration
mode.
MAC address AA:BB:CC:DD:EE:FF
where each part is in the range 00-
FF
2
save
Save ap-database
configuration changes.
3
cancel
Roll back ap-database
configuration changes.
4
exit
Save ap-database
configuration changes and
current mode.
5
mode
Configure the AP Managed
mode
AP mode
6
location
Configure the AP location
description.
String
7
password
Configure the AP
Authentication Password.
String
8
profileid <1-16>
Set the AP Profile ID to use
for configuration.
AP Profile ID
9
ssid
Configure the stand-alone
AP expected SSID.
String
10
channel
Configure the stand-alone
AP expected channel.
Unsigned integer
11
wds_mode
Configure the stand-alone
AP expected WDS mode.
Stand-alone AP expected WDS