42
Roll back AP profile radio settings
changes.
Configure the physical mode for the
radio interface.
Enable/Disable the radio operational
mode.
Enable/Disable Station Isolation.
Configure the RTS threshold.
Enable load balancing parameters for
the radio.
Configure the percentage utilization.
Range of power
percentage
Configure the maximum number of
simultaneous client associations
allowed.
Enable/Disable scan of other channels.
Set the scan mode to sentry.
Configure the DTIM period.
Configure the beacon interval.
Enable/Disable the Automatic Power
Save Delivery mode for the radio.
Enable/Disable auto power adjustment.
Configure a default power setting for
the radio.
Range of power
percentage
Configure data rates for the radio.
Configure basic client rates.
Configure supported client rates.
Enable/Disable channel auto-eligibility
for client connections.
2.17 wlan ap_profile QoS configure <profileid> <radio>