D-Link DWC-2000

80
13
lan cos-map configure
Configures CoS map for QoS.
14
lan dscp-map
Configures a DSCP map for
the controller.
15
lan dscp-map show
Displays DSCP priority
mapping for the controller.
16
lan dscp-map configure
Configures DSCP map for
QoS.
17
lan cos-to-dscp-remarking
enable
Enables CoS to DSCP
remarking.
18
lan cos-to-dscp-remarking
disable
Disables CoS to DSCP
remarking.
19
lan queue
Queues scheduling and
management configuration.
20
lan queue management
LAN queue management
configuration.
21
lan queue management show
Shows queue management
configuration.
22
lan queue scheduling-algo
Configures a queue
scheduling algorithm.
23
lan queue scheduling-algo set
Sets the queue scheduling
algorithm on the LAN.
24
lan queue scheduling-algo
show
Show the queue scheduling
algorithm on the LAN.
25
lan cos-to-dscp-remarking
configure
Disables CoS to DSCP
remarking.
6.7 qos lan dscp-map configure <dscpValue> <priorityQueue>
S.No
Command Name
Description
Type and Description
1
<dscpValue> <priorityQueue>
Configures DSCP map
for QoS.
DSCP value to be
configured based on
priority in the QoS queue.
2
lan status
Displays status of LAN
QoS.
3
lan enable
Enables QoS on LAN.
4
lan disable
Disables QoS on LAN.
5
lan trustmode
Configures trust mode
configuration for the
controller.
6
lan trustmode status
Shows the trust mode
configuration on the
controller.
7
lan trustmode cos
Configures CoS based
QoS for a controller