D-Link DWC-2000 - System Group Access_Control_Ip Delete <Row_Id; 5 Configuration Commands under Branch UTIL; Util System_Check Ping <Ip_Address; Util System_Check Dns_Lookup <Dns

72
2
exit
Save changes to group access
control IP configuration and
exit current mode.
3
cancel
Roll back changes to group
access control IP
configuration.
4
group_id
Group ID.
Unsigned integer.
5
address_type
Address type.
Source address type for users IP
policy.
6
source_address
Set the source address.
IP address AAA.BBB.CCC.DDD
where each part is in the range 0-
255
7
mask_length
Set the source network mask
length.
Number in range of 1 to 32
4.34 system group access_control_ip delete <row_id>
S.No
Command Name
Description
Type and Description
1
<row_id>
Delete an IP from Access Control IPS
list.
Unsigned integer.
5.0 Configuration commands under branch UTIL
5.1 util system_check ping <ip_address>
S.No
Command Name
Description
Type and Description
1
<ip_address>
Ping an Internet Address.
String.
5.2 util system_check dns_lookup <dns>
S.No
Command
Name
Description
Type and
Description
1
<dns>
Retrieves the IP address of a Web, FTP, Mail or
any other Server on the Internet.
String.
5.3 util system_check traceroute <ip_address>
S.No
Command
Name
Description
Type and
Description
1
<ip_address>
Display all the routers present between the
destination IP address and this router.
String.
5.4 util system_check capturePackets start <interface>
S.No
Command
Name
Description
Type and Description