36
Enable/Disable debugging
on Managed AP.
Enter the admin password
for the AP (the default is
admin.
Enter the admin password
again.
Enable/Disable debugging
on Managed AP.
2.2 wlan ap_management ap_database add <macaddr>
wlan ap-management ap-
database configuration
mode.
MAC address AA:BB:CC:DD:EE:FF
where each part is in the range 00-
FF
Save ap-database
configuration changes.
Roll back ap-database
configuration changes.
Save ap-database
configuration changes and
current mode.
Configure the AP Managed
mode.
Configure the AP location
description.
Configure the AP
Authentication Password.
Set the AP Profile ID to use
for configuration.
Configure the stand-alone
AP expected SSID.
Configure the stand-alone
AP expected channel.
Configure the stand-alone
AP expected WDS mode.
Stand-alone AP expected WDS
mode
Configure the stand-alone
AP expected security
mode.
Stand Alone AP Security mode
Configure the stand-alone