D-Link DWC-2000

55
7
Authentication_Port_1
Set port for primary server.
Port number
8
Authentication_Port_2
Set port for secondary server.
Port number
9
Authentication_Port_3
Set port for optional server.
Port number
10
SSL_Enable_1
Enable SSL for primary server.
Boolean choice
11
SSL_Enable_2
Enable SSL for secondary server.
Boolean choice
12
SSL_Enable_3
Enable SSL for optional server.
Boolean choice
13
CA_File_1
CAFILE for primary server.
String
14
CA_File_2
CAFILE for secondary server.
String
15
CA_File_3
CAFILE for optional server.
String
16
serverCheck
Check the reachability of configured
servers.
4.5 system POP3_Settings POP3_Trusted_CA
S.No
Command
Name
Description
Type and Description
1
exit
Exit
POP3_Trusted_CA.
2
add
Add a certificate.
String
IP address AAA.BBB.CCC.DDD where each
part is in the range 0-255
3
delete
Delete a certificate.
String
4.6 system logging ipv4 configure
S.No
Command Name
Description
Type and
Description
1
save
Save logging configuration
changes.
2
exit
Save logging configuration
changes and exit current
mode.
3
cancel
Roll back logging configuration
changes.
4
unicast_traffic_logs
All Unicast Traffic logs
Enable/Disable
Boolean choice