D-Link DWC-2000 - Page 28

26
radius_server
parameters.
53
wlan wlan_global_setting country
country code for
the wireless
network.
54
wlan wlan_global_setting
ap_validation configure
wlan ap_validation
configuration mode.
55
wlan wlan_global_setting
radius_server configure
wlan radius_server
configuration mode.
56
wlan wlan_global_setting country
configure
wlan country
configuration mode.
57
wlan wlan_global_setting
wireless_switch <enable>
Enable/Disable the
wireless controller.
The command “license ?” at the CLI prompt, gives a description of all the
configuration commands in the branch license , these are as follows:
1
license list
List license on the device
2
license
activate <activationKey>
activate a license on the
device.
The command “system ?” at the CLI prompt, gives a description of all the
configuration commands in the branch system, these are as follows:
1
system POP3_Settings
System POP3
configuration
commands.
2
system NT-Domain-Settings
Configure NT-Domain
Settings
4
system LDAP_Settings
Configure LDAP
Settings
5
system POP3_Settings
POP3_Server_Configuration
Configure POP3 Server
6
system POP3_Settings
POP3_Trusted_CA
Upload POP3 trusted
Certificates
7
system logging
.
8
system logging ipv4
System logging
configuration.
9
system logging facility
System log Facility
configuration.
10
system logging remote
System remoteLogging
configuration.
11
system logging ipv6
System ipv6 logs
configuration.
12
system logging ipv4 configure
System logging