D-Link DWC-2000

32
22
qos lan cos-to-dscp-remarking disable
Disables cos-to-
dscp remarking.
23
qos lan cos-to-dscp-remarking status
Display status of
cos-to-dscp-
remarking.
24
qos lan cos-to-dscp-remarking
configure <cosValue> <dscpValue>
Configures cos-
to-dscp
remarking.
25
qos lan queue management show
Queue
management
configuration
show.
26
qos lan queue scheduling-algo
set <sched-algo>
Set the queue
scheduling
algorithm on the
LAN.
27
qos lan queue scheduling-algo show
Show the queue
scheduling
algorithm on the
LAN.
The command “net ?” at the CLI prompt, gives a description of all the
configuration commands in the branch net , these are as follows:
1
net bandwidth
.
2
net bandwidth profile
It gives options to
add/edit/delete a
bandwidth profile.
3
net bandwidth profile
enable <enable>
It allows you to
enable/disable
bandwidth profiles.
4
net bandwidth profile add
It allows you to add a
bandwidth profile.
5
net bandwidth profile
edit <row_id>
It allows you to edit a
bandwidth profile.
6
net bandwidth profile
delete <row_id>
It allows to you delete a
bandwidth profile.
7
net bandwidth traffic_selector
It gives you options to
add/edit/delete a traffic
selector for a bandwidth
profile.
8
net bandwidth traffic_selector add
It allows you to add a
traffic selector for a
bandwidth profile.
9
net bandwidth traffic_selector
It allows you to edit a