D-Link DWL-2100AP User Manual

17DWL-2100AP User Manual
When you select WPA-PSK, WPA2-PSK, or WPA-Auto-PSK, you must
select AUTO, AES, or TKIP from the pull-down menu.
Select the interval during which the group key will be valid. The
default value of 1800 is reommended.
Enter a passphrase. The passphrase is an alpha-numeric password
between 8 and 63 characters long. The password can include symbols
(!?*&_) and spaces. Make sure you enter this key exactly the same on all
other wireless clients.
Cipher Type:
Group Key Update
Interval:
PassPhrase:
Access Point (WPA-PSK/WPA2-PSK)

D-Link DWL-2100AP Specifications

General

Frequency Band	2.4 GHz
Data Transfer Rate	54 Mbps
Security	WEP, WPA, WPA2
LAN Port	1 x 10/100Base-TX (RJ-45)
Device Type	Wireless Access Point
Form Factor	External
Data Link Protocol	IEEE 802.11b, IEEE 802.11g
Antenna Qty	1
Interface	1 x 10Base-T/100Base-TX - RJ-45
Power Supply	External power adapter
Wireless Standard	IEEE 802.11b/g
Antenna	Detachable
Compliant Standards	IEEE 802.11b, IEEE 802.11g
Encryption Algorithm	WEP, WPA, WPA2
Authentication Method	RADIUS
Features	MAC address filtering
Operating Modes	Access Point, Repeater