EasyManuals Logo

D-Link DWL-2100AP User Manual

D-Link DWL-2100AP
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #61 background imageLoading...
Page #61 background image
61DWL-2100AP User Manual
WEP Encryption
Select the key size (64-bit, 128-bit, or 152-bit) and key type (HEX or
ASCII) and then enter a string to use as the key. The key length is
automatically adjusted based on the settings you choose.
Active Key Index:
Select which defined key is active on the selected device(s).
Key Values:
The key is communicated across the network.
Open:
Shared:
Open System/
Shared Key:
Limited to communication with devices that share the same
WEP settings.
The key is communicated and identical WEP settings are required.
Authentication
Type:
Select from the pulldown menu the type of authentication to be used
on the selected device(s).

Table of Contents

Other manuals for D-Link DWL-2100AP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DWL-2100AP and is the answer not in the manual?

D-Link DWL-2100AP Specifications

General IconGeneral
Frequency Band2.4 GHz
Data Transfer Rate54 Mbps
SecurityWEP, WPA, WPA2
LAN Port1 x 10/100Base-TX (RJ-45)
Device TypeWireless Access Point
Form FactorExternal
Data Link ProtocolIEEE 802.11b, IEEE 802.11g
Antenna Qty1
Interface1 x 10Base-T/100Base-TX - RJ-45
Power SupplyExternal power adapter
Wireless StandardIEEE 802.11b/g
AntennaDetachable
Compliant StandardsIEEE 802.11b, IEEE 802.11g
Encryption AlgorithmWEP, WPA, WPA2
Authentication MethodRADIUS
FeaturesMAC address filtering
Operating ModesAccess Point, Repeater

Related product manuals