D-Link DWL-2100AP User Manual

71DWL-2100AP User Manual
Select this option to obtain information on IEEE802.11g clients.
A client is a device on the network that is communicating with the
DWL-2100AP.
Displays the MAC address of the client.
Displays the wireless band.
Displays the type of authentication that is enabled.
Receive Signal Strength Indicator indicates the strength of the
signal.
Displays the status of the power saving feature.
Displays the SSID (Service Set Identifier).
The following information is available for each client that is communicating with the
DWL-2100AP.
Client
Information:
MAC:
Band:
Authentication:
RSSI:
Power Saving
Mode:
SSID:
Client-Info

D-Link DWL-2100AP Specifications

General

Frequency Band	2.4 GHz
Data Transfer Rate	54 Mbps
Security	WEP, WPA, WPA2
LAN Port	1 x 10/100Base-TX (RJ-45)
Device Type	Wireless Access Point
Form Factor	External
Data Link Protocol	IEEE 802.11b, IEEE 802.11g
Antenna Qty	1
Interface	1 x 10Base-T/100Base-TX - RJ-45
Power Supply	External power adapter
Wireless Standard	IEEE 802.11b/g
Antenna	Detachable
Compliant Standards	IEEE 802.11b, IEEE 802.11g
Encryption Algorithm	WEP, WPA, WPA2
Authentication Method	RADIUS
Features	MAC address filtering
Operating Modes	Access Point, Repeater