D-Link DWL-2100AP User Manual

23DWL-2100AP User Manual
Enable or Disable SSID broadcast. Enabling this feature broadcasts
the SSID across the network.
6 is the default channel for IEEE 802.11g. All devices on the network
must share the same channel.
Note: The wireless adapters will automatically scan and match the
wireless setting.
This option is unavailable in WDS.
Enter the MAC addresses of the APs in your network that will serve
as bridges to wirelessly connect multiple networks.
Select Open System to communicate the key across the
network.
Select Shared Key to limit communication to only those devices
that share the same WEP settings.
Select Open System/Shared Key to allow either form of data
encryption.
Select WPA-PSK, WPA2-PSK, or WPA-Auto-PSK to secure your
network using a password and dynamic key changes (No RADIUS
server required).
SSID Broadcast:
Channel:
Auto Channel
Scan:
Remote AP MAC
Address:
Authentication:

D-Link DWL-2100AP Specifications

General

Frequency Band	2.4 GHz
Data Transfer Rate	54 Mbps
Security	WEP, WPA, WPA2
LAN Port	1 x 10/100Base-TX (RJ-45)
Device Type	Wireless Access Point
Form Factor	External
Data Link Protocol	IEEE 802.11b, IEEE 802.11g
Antenna Qty	1
Interface	1 x 10Base-T/100Base-TX - RJ-45
Power Supply	External power adapter
Wireless Standard	IEEE 802.11b/g
Antenna	Detachable
Compliant Standards	IEEE 802.11b, IEEE 802.11g
Encryption Algorithm	WEP, WPA, WPA2
Authentication Method	RADIUS
Features	MAC address filtering
Operating Modes	Access Point, Repeater