D-Link DWL-2100AP User Manual

38DWL-2100AP User Manual
The Range of Pool
(1-255):
SubMask:
Gateway:
Wins:
DNS:
Domain Name:
Lease Time
(60-31536000
sec.):
Status:
Enter the number of IP addresses available for assignment.
All devices in the network must have the same subnet mask to
communicate. Enter the submask for the network here.
Enter the IP address of the gateway on the network.
Windows Internet Naming Service is a system that determines the
IP address of a network computer that has a dynamically assigned
IP address.
Enter the IP address of the DNS server. The DNS (Domain Name
Server) translates domain names such as www.dlink.com into IP
addresses.
Enter the domain name of the DWL-2100AP, if applicable. (An
example of a domain name is: www.dlink.com.)
The Lease Time is the period of time before the DHCP server will
assign new IP addresses.
Turn the Dynamic Pool Settings ON or OFF here.

D-Link DWL-2100AP Specifications

General

Frequency Band	2.4 GHz
Data Transfer Rate	54 Mbps
Security	WEP, WPA, WPA2
LAN Port	1 x 10/100Base-TX (RJ-45)
Device Type	Wireless Access Point
Form Factor	External
Data Link Protocol	IEEE 802.11b, IEEE 802.11g
Antenna Qty	1
Interface	1 x 10Base-T/100Base-TX - RJ-45
Power Supply	External power adapter
Wireless Standard	IEEE 802.11b/g
Antenna	Detachable
Compliant Standards	IEEE 802.11b, IEEE 802.11g
Encryption Algorithm	WEP, WPA, WPA2
Authentication Method	RADIUS
Features	MAC address filtering
Operating Modes	Access Point, Repeater