58DWL-2100AP User Manual
DTIM (1~255):
This sets the fragmentation threshold (specified in bytes). Packets
exceeding the value set here will be fragmented. The default is 2346.
Fragment Length
(256~2346):
The RTS value should not be changed unless you encounter
inconsistent data flow. The default value is 2346.
DTIM (Delivery Traffic Indication Message) is a countdown informing
clients of the next listening window for broadcast and multicast
messages.
RTS Length
(256~2346):
Enable this option to allow the access point to automatically scan
for an available channel.
A pulldown menu for selecting the transmit power of the selected
device(s).
Tx Power:
Beacons are packets sent by an access point to synchronize a
network. Specify the beacon value for the selected device(s) here.
The default value of 100 is recommended.
Beacon Interval
(20~1000):
A pulldown menu to select the maximum wireless signal rate for the
selected devices(s).
Data Rate:
Auto Channel Scan:
Select Short and Long (default) or Long Only.
Preamble:
To Next Page
Loading...
