DWR-956 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports and 1 FXS Port
User Manual
Configuring via Web-based Interface
Parameter Description
DNS IP address
Available if the Access point, Repeater, or Client mode was
selected in the Initial Configuration Wizard.
If needed, specify a DNS server IPv6 address.
If you want to specify several DNS servers, click the ADD button,
and in the line displayed, enter the IPv6 address.
To remove the address, click the Delete button ( ) in the line of
the address.
The DNS servers specified on this page will have higher priority
than the servers specified on the Advanced / DNS page.
In the Dynamic IP Addresses section, you can configure IPv6 addresses assignment settings.
Figure 98. Configuring the local interface. The IPv6 tab. The Dynamic IP Addresses section.
Page 113 of 302
To Next Page
Loading...
