DWR-956 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports and 1 FXS Port
User Manual
Configuring via Web-based Interface
On the VoIP / Rings page, you can configure ring signal parameters.
Figure 166. The VoIP / Rings page.
To add a new ring, in the Rings List section, click the ADD button ( ).
Figure 167. The page for adding a ring.
On the opened page, specify a ring name in the Name field for easier identification.
To specify the signal parameters for a ring, in the Signal List section click the ADD button ( ).
Figure 168. The window for specifying signal parameters.
Page 215 of 302
To Next Page
Loading...
