DWR-956 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports and 1 FXS Port
User Manual
Configuring via Web-based Interface
On the SkyDNS / Settings page, you can enable the SkyDNS service and specify settings for its
operation.
Figure 215. The SkyDNS / Settings page.
To enable the SkyDNS service, click the ENABLE button. Then in the Mail and Password fields,
enter the account data (the e-mail address and the password correspondingly) specified upon
registration on the SkyDNS service web site. Click the APPLY button. The account data
(authorization status, the tariff used), the Default profile drop-down list, and the Sync period
field will be displayed on the page. If needed, from the Default profile list, select another filtering
profile which will be used for all devices of your LAN and click the APPLY button again.
The default filtering profile will be applied to all devices newly connected to the router's network.
To change the parameters of your account on the SkyDNS service web site, click the GO TO
PERSONAL PROFILE PAGE button.
Page 293 of 302
To Next Page
Loading...
