DWR-956 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports and 1 FXS Port
User Manual
Configuring via Web-based Interface
#,,
On the Wi-Fi / WMM page, you can enable the Wi-Fi Multimedia function. To configure the
2.4GHz band or 5GHz band, go to the relevant tab.
The WMM function implements the QoS features for Wi-Fi networks. It helps to improve the
quality of data transfer over Wi-Fi networks by prioritizing different types of traffic.
Select the needed action from the drop-down list in the Work mode section to configure the
WMM function.
• Auto: The settings of the WMM function are configured automatically (the value is
specified by default).
• Manual: The settings of the WMM function are configured manually. When this value is
selected, the Access Point and Station sections are displayed on the page.
Figure 128. The page for configuring the WMM function.
!
All needed settings for the WMM function are specified in the device's system. Changing
parameters manually may negatively affect your WLAN!
The WMM function allows assigning priorities for four Access Categories (AC):
• BK (Background), low priority traffic (print jobs, file downloads, etc.).
• BE (Best Effort), traffic from legacy devices or devices/applications that do not support
QoS.
• VI (Video).
• VO (Voice).
Page 160 of 302
To Next Page
Loading...
