DWR-956 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports and 1 FXS Port
User Manual
Configuring via Web-based Interface
/
On the VoIP / Advanced Settings page, you can specify additional settings for VoIP.
Figure 164. The VoIP / Advanced Settings page.
Parameter Description
Locale selection
Select your country from the drop-down list. This setting defines the
parameters of the phone signals traditional for the specific country.
Replace # with %23
RFC3261 doesn't support # (pound) for a phone number. If a phone
number has the character, move the switch to the right to replace the
character # with the special sequence %23.
Support rport
Move the switch to the right to enable the Symmetric Response
Routing function in accordance with RFC3581. This function allows
sending responses to a request to the port and IP address from which
the request was received via the NAT-enabled router. The SIP proxy
server must support the function.
Page 212 of 302
To Next Page
