DWR-956 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports and 1 FXS Port
User Manual
Configuring via Web-based Interface
Fax Settings
On the VoIP / Profile Name / Fax Settings page, you can specify settings of data
receipt/transfer for the fax machine connected to the FXS port of the router.
Figure 178. The VoIP / Profile Name / Fax Settings page.
Parameter Description
T.38
Enable T.38 support
Move the switch to the right to allow support of the T.38 protocol. If
the switch is moved to the right, the Fax/Modem determination
drop-down list and the Enable custom parameters switch are
displayed on the page.
Fax/Modem
determination
From the drop-down list, select a mode of fax/modem signal
detection.
Page 233 of 302
To Next Page
Loading...
