DWR-956 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports and 1 FXS Port
User Manual
Configuring via Web-based Interface
Parameter Description
Jitter Buffer
Delay /
Maximal delay
The Jitter Buffer parameter improves the quality of voice
transmission: received voice packets are specially delayed, which
allows their reproducing in the order they were sent from the
transmitting side.
Specify the minimal and maximal packets waiting period (in
milliseconds) in the relevant fields.
Factor
This parameter enhances efficiency of jitter buffer operation. When
the minimal value is selected, the delay value will tend to be lower.
Select the relevant value from the drop-down list.
Timeout Settings
Waiting for first digit
The delay time before the first digit is dialed (in seconds). Specify
the required value.
Dial delay time
The delay time before the next digit is dialed (from 3 to 9 seconds).
When this time expires, the router regards that the dialing is
completed and makes the call.
BusyTone timeout
Busy tone duration (in seconds).
HowlerTone timeout Howler tone duration (in seconds).
RTCP
Send RTCP
Real-Time Transport Control Protocol.
Move the switch to the right to allow sending RTCP packets. RTCP
packets exchange allows receiving statistics on RTP packets
delivery.
Sending interval Specify the time period (in seconds) between sending packets.
After specifying the needed parameters, click the APPLY button.
Page 232 of 302
To Next Page
Loading...
