DWR-956 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports and 1 FXS Port
User Manual
Configuring via Web-based Interface
8îî1
On the LTE Modem / Modem 1 / USSD page, you can send a USSD command for the SIM
card.
11
USSD (Unstructured Supplementary Service Data) is a technology which provides real-time
message exchange between a subscriber and a mobile operator's special application. USSD
commands are often used to check the SIM card balance, receive data on the rate plan or service
packets, etc.
Figure 144. The LTE Modem / Modem 1 / USSD page.
In the Number field, enter a USSD command and click the SEND button. After a while, the
results will be displayed in the Response field.
11 Contact your operator to get information on USSD commands and their functions.
Page 185 of 302
To Next Page
Loading...
