DWR-956 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports and 1 FXS Port
User Manual
Configuring via Web-based Interface
In the opened window, specify the needed parameters.
Parameter Description
Connection
From the drop-down list, select a WAN connection to which traffic
balancing will be applied.
Traffic adjustment
Select a value from the drop-down list.
• Auto: Traffic is equally divided among connections with the
same setting.
• Manual: Traffic is equally divided among connections in
accordance with the value specified in the Weight field.
Weight
Specify the percentage of traffic which will pass through the
connection.
After specifying the needed parameters, click the SAVE button.
To edit the setting for an added connection, in the Connections List section, select the relevant
line in the table. In the opened window, change the value and click the SAVE button.
To remove a connection from the page, in the Connections List section, select the checkbox
located to the left of the relevant line of the table and click the DELETE button ( ).
After specifying the needed parameters, click the APPLY button. Upon that the Status field is
displayed on the page.
To disable the traffic balancing function, move the Enable switch to the left and click the APPLY
button.
Page 122 of 302
To Next Page
Loading...
