DWR-956 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports and 1 FXS Port
User Manual
Overview
LED Mode Description
LAN
Solid green
The cable is connected to a LAN port.
Blinking green
Data transfer through one or several LAN ports.
No light
The cable is not connected to a LAN port.
WAN
Solid green
The cable is connected to the WAN port.
Blinking green
Data transfer through the WAN port.
No light
The cable is not connected to the WAN port.
VOICE
Solid green
The line is registered on the SIP server.
Slow blinking green
Attempting to register on the SIP server.
Fast blinking green
An incoming call or talking.
No light
The line is not registered on the SIP server, because
registration is disabled or the corresponding connection
is off.
SMS
Solid green
An unread message (or messages).
No light
No unread messages.
SIGNAL STRENGTH
Solid green
Poor signal strength.
Fair signal strength.
Good signal strength.
Excellent signal strength.
Blinking green
Searching for a mobile operator network.
No light
The SIM card is not installed or is blocked.
In case the POWER, 5GHz, 2.4GHz, 4G, 2G/3G, VOICE, SMS, and SIGNAL STRENGTH
LEDs are fast blinking green at the same time and the INTERNET LED is fast blinking red, the
device is in the emergency mode. Power the device off and on. If the device is loaded in the
emergency mode again, restore the factory default settings via the hardware RESET button.
Page 15 of 302
To Next Page
Loading...
