DWR-956 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports and 1 FXS Port
User Manual
Configuring via Web-based Interface
Parameter Description
Inform Settings
On
Move the switch to the right so the router may send reports (data on
the device and network statistics) to the ACS.
Interval Specify the time period (in seconds) between sending reports.
Auto Configuration Server Settings
Get URL address via
DHCP
If the switch is moved to the right, the router obtains the URL
address of the ACS upon establishing the Dynamic IP type
connection.
If you need to specify the URL address manually, move the switch
to the left and enter the needed value in the URL address field.
URL address
The URL address of the ACS provided by the ISP.
Username The username to connect to the ACS.
Password
The password to connect to the ACS. Click the Show icon ( ) to
display the entered password.
Connection Request Settings
Username
The username used by the ACS to transfer a connection request to
the router.
Password
The password used by the ACS. Click the Show icon ( ) to
display the entered password.
Request port
The port used by the ACS. By default, the port 8999 is specified.
Request path The path used by the ACS.
When you have configured the parameters, click the APPLY button.
Page 202 of 302
To Next Page
Loading...
