DWR-956 Wireless AC1200 4G LTE Router
with Gigabit Ethernet Ports and 1 FXS Port
User Manual
Overview
In addition, the router supports IPsec and allows to create secure VPN tunnels. Support of the
IKEv2 protocol allows to provide simplified message exchange and use asymmetric authentication
engine upon configuration of an IPsec tunnel.
The router also supports the SkyDNS web content filtering service, which provides more settings
and opportunities for safer Internet experience for home users of all ages and for professional
activities of corporate users.
Now the schedules are also implemented; they can be applied to the rules and settings of the
firewall and used to reboot the router at the specified time or every specified time period, to set
rules for limitation of wireless client maximum bandwidth, and to enable/disable the wireless
network and the Wi-Fi filter.
You can configure the settings of the wireless router DWR-956 via the user-friendly web-based
interface (the interface is available in several languages).
The configuration wizard allows you to quickly switch DWR-956 to one of the following modes:
router (for connection to a wired or wireless ISP), access point, repeater, or client, and then
configure all needed setting for operation in the selected mode in several simple steps.
Also DWR-956 supports configuration and management via mobile application for Android and
iPhone smartphones.
You can simply update the firmware: the router itself finds approved firmware on D-Link update
server and notifies when ready to install it.
Page 8 of 302
To Next Page
Loading...
