D-Link DXS-1210-16TC - Page 129

DXS-1210 Series Smart Managed Switch CLI Reference Guide
126
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
This command is used to create, modify or delete an ITU-T G.8032 ERP physical ring and enter the
ERP configuration mode.
Example
This example shows how to create an ERP ring named “campus”.
Switch#configure terminal
Switch(config)# erps instance 1
Switch(config-erps-instance)#ring campus
18-3 ethernet ring g8032 profile
This command is used to create or modify a G.8032 profile and enter the ERP profile configuration
mode. Use the no form of this command to delete the specified profile.
erps profile PROFILE-NAME
no erps profile PROFILE-NAME
Parameters
PROFILE-NAME
Specifies the name of the G.8032 profile with the maximum of 32
characters.
Default
None.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
This command is used to create, modify or delete a G.8032 profile and enter the ERP profile
configuration mode.
Example
This example shows how to create a G.8032 profile named “campus”.
Switch#configure terminal
Switch(config)# erps profile campus
Switch (config-erps-profile)#
18-4 r-aps channel-vlan
This command is used to specify the APS channel VLAN for an ERP instance.Use the no form of this
command to delete the configuration.
r-aps channel-vlan VLAN-ID