D-Link DXS-1210-16TC - Page 325

DXS-1210 Series Smart Managed Switch CLI Reference Guide
322
and after the hyphen.
broadcast
Specifies to display the current broadcast storm setting.
multicast
Specifies to display the current multicast storm setting.
unicast
Specifies to display the current unicast(DLF) storm setting.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
If the interface ID is not specified, all interfaces configurations will be displayed.
If the packet type is not specified, all types of storm control settings will be displayed.
Example
This example shows how to displaythe current broadcast storm control settings.
Switch# show storm-control interface range ethernet 1/0/1-1/0/6 broadcast
Polling Interval : 15 sec Shutdown Retries : Infinite
Trap : Disabled
Interface Storm Action Threshold Current State
-----------------------------------------------------------
eth1/0/1 Broadcast Drop 500/300 pps 200 pps Forwarding
eth1/0/2 Broadcast Drop 80/64 % 20 % Forwarding
eth1/0/3 Broadcast Drop 80/64 % 70 % Dropped
eth1/0/4 Broadcast Shutdown 60/50 % 20 % Forwarding
eth1/0/5 Broadcast None 60000/50000 kbps 2000 kbps Forwarding
eth1/0/6 Broadcast None - - Inactive
Total Entries: 6
Switch#
This example shows how to display all interface settings for the range from port 1/0/1 to port 1/0/2.
Switch# show storm-control interface eth1/0/1-2
Polling Interval : 15 sec Shutdown Retries : Infinite
Trap : Disabled
Interface Storm Action Threshold Current State
---------------------- --------------------------------------------
eth1/0/1 Broadcast Drop 80/64 % 50% Forwarding
eth1/0/1 Multicast Drop 80/64 % 50% Forwarding
eth1/0/1 Unicast Drop 80/64 % 50% Forwarding
eth1/0/2 Broadcast Shutdown 500/300 pps - Error Disabled
eth1/0/2 Multicast Shutdown 500/300 pps - Error Disabled
eth1/0/2 Unicast Shutdown 500/300 pps - Error Disabled
Total Entries: 6
Switch#