D-Link DXS-1210-16TC - Page 70

DXS-1210 Series Smart Managed Switch CLI Reference Guide
67
This command displays information about the user accounts created on the Switch.
Example
This example shows how to display all user accounts information.
Switch# show user-account
User Name Privilege Password Password Type
------------------ --------- -------- -------------
admin 15 ****** Plain Text
Total Entries: 1
Switch#
5-20 show service password-encryption
This command is used to display information about the password-encryption.
show service password-encryption
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays information about the password-encryption.
Example
This example shows how to display password-encryption.
Switch# show service password-encryption
Password Encryption State: Disabled
Switch#
5-21 show session-timeout
This command is used to display information about the session-timeout.
show session-timeout
Parameters
None.
Default
None.
Command Mode