D-Link DXS-1210-16TC - Page 71

DXS-1210 Series Smart Managed Switch CLI Reference Guide
68
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays information about the session-timeout.
Example
This example shows how to display session-timeout.
Switch# show session-timeout
Web Session Timeout (second): 36000
Telnet Session Timeout (minute): 30
Console Session Timeout (minute): 30
Switch#
5-22 show ip {http | telnet} service-port
This command is used to display information about the http or telnet service port.
show ip {http | telnet} service-port
Parameters
http Specifies the http service port.
telnet Specifies the telnet service port.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays information about the http or telnet service port.
Example
This example shows how to display http service port.
Switch# show ip http service-port
IP HTTP server port : 80
Switch#
5-23 ping access-class
This command is used to specify an access list to restrict the access to ping switch. Use the no form
of the command to remove the access list check.