D-Link DXS-1210-16TC - Page 72

DXS-1210 Series Smart Managed Switch CLI Reference Guide
69
ping access-class IP-ACL
no ping access-class IP-ACL
Parameters
IP-ACL
Specifies a standard IP access list. The source address field of the
permit or deny entry define the valid or invalid host.
Default
None.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
This command is used to specify an access list to restrict the access to ping switch. Use the no form
of the command to remove the access list check.
Example
This example shows how a standard IP access list is created and is specified as the access list to
restrict the access to ping switch.Only the host 226.1.1.1 is allowed to access the server.
Switch# configure terminal
Switch(config)#ip access-list ping-filter
Switch(config-ip-acl)#rule permit 226.1.1.1 255.255.255.0
Switch(config-ip-acl)# exit
Switch(config)# ping access-class ping-filter
Switch(config)#
5-24 ip https access-class
This command is used to specify an access list to restrict the access to the HTTPS server. Use the no
form of the command to remove the access list check.
ip https access-class IP-ACL
no ip https access-class IP-ACL
Parameters
IP-ACL
Specifies a standard IP access list. The source address field of the
permit or deny entry define the valid or invalid host.
Default
None.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.