Daedong DSC62 User Manual

4-12 DSC62
LEVER FOR DROPPER AND
CUTTER SHIFTING
(1) Lever for dropper and cutter shifting
(A) Cutter (B) Dropper
You can switch between the cutter
and dropper with this lever.
When operating, pull the lever to
the utmost. When harvesting is
over, the shifting lever should be
placed at the position of “Dropper”.
417O417A
(1) Fan adjustment lever (A) Weak
(B) Standard (C) Strong
Please refer to “Location and
Scope abo ut Crops St anda rd
Threshing Adjustment” for adjust-
ment method.
1. Threshing clutch lever is placed
at “Start”.
2. Use fan adjustment lever to ad-
just fan power in four stage from
“strong” to “weak”.
3. Adjust speed adjusting lever
to the green upper limit under
the state of engaging threshing
clutch.
FAN POWER ADJUSTMENT
METHOD
E32O404A
When treating the debris,
please idle run the thresh-
ing unit for 30 seconds.
•
CAUTION
DSC62-영문판-4장.indd 12 2012-04-17 오후 4:55:05

Daedong DSC62 Specifications

General

Brand	Daedong
Model	DSC62
Category	Farm Equipment
Language	English