Daedong DSC62 - Page 57

HOW TO USE METERS, GAUGES AND CONTROLLERS 4-17
4

WARNING
Flickering lamp Horn Engine Cause of the trouble Troubleshooting
Straw discharging
lamp
Beep Operating
The straw discharging
unit is clogged

Remove straw trash in the discharging unit.
Grain lamp
Beep – The hopper is full

Stop the engine and remove the clogged straws.
No.2 lamp
Beep – No.2 outlet is clogged

Stop the engine and remove the clogged straws.
No.1 lamp
Beep – No.1 auger is clogged

Stop the engine and remove the clogged straws.
Coolant temperature
lamp
Beep –
The coolant tempera
-
ture is too high

Whether the coolant is sufcient or there is leakage

Whether the fan belt is loosened and needs tightening

Check if dry straws or dust cover the dust screen,
radiator or oil tank. Cleaning is needed.
Self-diagnosis Alarm
Lamp
Beep –
Weeds or straws catch
on the sensor when
the automatic feeding
depth control is oper
-
ating.

Remove the straws or weeds.
DSC62-영문판-4장.indd 17 2012-04-17 오후 4:55:14