SELF-DIAGNOSIS WARNING (WHEN THE STOP LAMP IS FLICKERING)
LED sign Causes Troubleshooting Location
E•1, E•2
Straws or weeds catch on
the sensor.
The sensor or electrical
wiring is bad.
• Stop the automatic feeding
depth control.
• Remove the straws or weeds.
• Check the electrical wiring and
connectors.
E•3, E•9
The detection of the engine
speed is bad.
• Change the electronic pick up.
• Check the electrical wiring and
connectors.
E•4
The detection of the engine
speed or the No. 2
rotation detection is bad.
• Change the electronic pick up.
• Change the No. 2 sensor.
• Check the electrical wiring and
connectors.
E•5, E•8
The detection of the driving
speed is bad.
• Change the vehicle speed sen
-
sor.
• Check the electrical wiring and
connectors.
E•6
The neutral or back switch
is bad.
• Change the sensor.
• Check the electrical wiring and
connectors.
E•7
The detection of No.2 rota
-
tion is bad.
• Change the No. 2 sensor.
• Check the electrical wiring and
connectors.
E•A
The output of AES solenoid
is bad.
• Turn the main switch to STOP.
(1) LED Sign
417O422A
To Next Page
Loading...
