4
-54
DK35(CH)SE/DK40(CH)SE/DK45(C)HSE
Never operate tractor with a loose
rim, wheel, or axle.
Always tighten nuts to the speci-
fied torque.
Make sure to frequently check
that all these parts are firmly
tightened.
WARNING
!!
!!
!
TREAD
(1) Bolt (2) Rim Bolt (3) Disc
Follow same checking procedure
when tractor is first used.
It is dangerous to reduce the
tread on a slope or when trail-
ing.
Never use tires larger than
specified without approval from
KIOTI.
IMPORTANT
H23O4D0A
When working on a field where crops
are linearly aligned, the tread should be
adjusted so that the tires do not cross
over the crops.
It is also necessary to widen wheel
tread to decrease danger when work-
ing on slopes or hills, or when doing
trailer work, etc.
To Next Page
Loading...
