4
-41
DESCRIPTION OF OPERATING SYSTEM
4
(1) Wiper Operating Switch (Front)
(2) Wiper Operating Switch (Rear)
(3) Wiper Front
WIPER
1. To turn on, position the switch
marked (wiper) to the “ON” position.
2. The washer fluid is sprayed through
the nozzle of the wiper by pressing
the switch again with the key switch
in the “ACC” or “ON” position.
H11O485A
WARNING
Do not drive the tractor on a road
with the work lights ON at night.
The approaching or following
vehicle’s visibility can be
disturbed, which is very danger-
ous for both drivers. In this case,
use the hazard lamps.
!!
!!
!
The key switch should be positioned to
the “ACC” or “ON” position at this
moment.
To Next Page
Loading...
