1
-4
DK35(CH)SE/DK40(CH)SE/DK45(C)HSE
A ROPSand CAB should never be
modified by welding, grinding or cutting,
as this can weaken the ROPS
structure. If any components of the
ROPS unit is damaged, it must be
replaced.
If the ROPS unit is removed or loos-
ened for any reason, the parts should
be fitted back to their original positions
and all bolts should be properly torqued.
Always use seat belt when the trac-
tor is equipped with a ROPSand
CAB. Never use the seat belt when
tractor is not equipped with a
ROPS.
(ROPS: Roll-Over Protective
Structures)
21. Extra caution should be taken when
driving tractors with narrow tread
widths. For added stability you
should adjust your rear wheel tread
width, see page 4-55
19. Before starting your tractor you
should depress the clutch and
make sure that all shift levers are
in the neutral position and parking
brake is applied.
20. For your safety ROPS with a seat
belt is recommended for all
applications.
(1) Tread
T66O106A
T66O107A
NOTE
To Next Page