Rear Wheel/Brake/Suspension
Rear Wheel
Removal
Support the motorcycle on the main stand.
Remove the muffler. ( 4-9)
Remove the rear caliper assembly from the rear
swing arm.
Loosen the rear axle nut, remove the rear swing arm.
Remove the rear wheel inside collar.
Remove the rear wheel mud guard.
Remove the rear wheel.
Inspection
Turn the wheel, and check the rim for wobbles.
Service limit:Radical 2.0mm (0.08in)
Axial 2.0mm (0.08in)
Installation
Insert the rear wheel over the drive shaft.
13-3
Drive shaft
Muffler
Rear caliper
Rear axle nut
Rear swing arm