Ignition System
CDI Unit Inspection
CDI ignition circuit inspection
NOTE
- Remove the luggage box. (⇨ 4-5)
- Remove the body cover. (⇨ 4-6)
● Remove the coupler from the CDI unit, and
check the ignition system circuits from the wiring
coupler side.
Testing by CDI Tester
Check the CDI unit spark performance by using a
CDI tester.
Tool: Inspection adaptor
NOTE
Replace defective CDI unit.
16-3
Inspection item Terminal Standard value
Pulse generator Blue/yellow and green/white 50-170 20 (68)
Ignition coil (primary coil) Black/yellow and earth 3.6-4.6 20 (68)
A.C. generator Black/red and earth 50-350 20 (68)
Main switch Black/white (+) and earth(-)
No power connection when the main switch is ON
Wire harness earth Green and earth Power connected
Inspect the ignition system in proper sequence
based on the troubleshooting table.
Read tester manual carefully prior to using the
tester.
Adapter
CDI tester
CD unit
To Next Page
Loading...
