Starter System
Starter Motor
Removal
- Remove the luggage box. (⇨ 4-5)
- Remove the body cover (⇨ 4-6)
● Remove the starter motor cable from the motor.
● Unfasten the 2 starter motor mounting bolts, and
remove the starter motor.
NOTE
Inspection
● Check the starter motor terminal with a tester to
determine if power is connected.
Tester: PVA multi-tester
Installation
● Install a new O-ring and apply oil. Insert the
starter motor, and tighten the 2 bolts completely.
NOTE
● Assemble the luggage box and body cover.
17-2
• Accurately connect the earth terminal to the
starter motor mounting bolts.
• Turn off the main switch prior to servicing the
starter motor. If power is connected, the starter
motor may be activated and damaged.
Bolt
Bolt
PVA adapter
To Next Page
Loading...
