Fuel System
5-8
Float Level
Install the float valves, and float pins.
Check the float valve level.
Float level: 17.5mm
Assemble the float chamber.
Vacuum Chamber Assembly
Insert the jet needle and spring to the piston, and
install the holder.
NOTE
Install the compression spring and vacuum
chamber.
Carburetor Installation
Assemble the air vent, fuel tubes, and drain tubes
to the carburetor.
Match the diaphragm with the body notch.
Check the insulator O-ring for wear or damage,
and install the insulator.
Insulator
O-ring
Main jet
Float level gauge
Spring
To Next Page
Loading...
