Dahua Technology ASA1222E-S User Manual

Figure 3-22
Step 2. Click or to select bell you want to set, click to select row.
Step 3. Click or to select detail config item, such as bell time, bell time and
bell delay, click to edit corresponding item.
Parameter
Note
Time
Bell scheduled time, when this time is reached, it auto bells.
Cycle
Set ting cycle period, click or to switch, you can select
either every day or every week to set bell auto ON time.
Duration
Duration of each time of bell, it will turn off over the set period.
Chart 3-3
Step 4. Click to exit and save.
3.5.3.3 Recheck Interval
In set period, only first time attendance record will be valid, other attendance after the first
time will be invalid.
Step 1. Select Feature>Features>Recheck Interval, click .
Step 2. Click number key to set period or click or to adjust time, unit is
minute.
Step 3. Click to confirm.

Dahua Technology ASA1222E-S Specifications

General

Type	Basic access control reader
Certification	CE, FCC
Product color	Black
LED indicators	Status
Number of users	1000 user(s)
Access code reader	-
Fingerprint reader	Yes
Authentication type	Password
Keypad number of keys	16
Fingerprint sensor type	Optical
Flash memory	0.08 GB
Display type	TFT
Display diagonal	2.4 \
Maximum resolution	320 x 240 pixels
DC voltage range	5 - 5 V
Power consumption	1000 mA
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	5 - 95 %
Front camera	No

Weight and Dimensions

Depth	120 mm
Width	175 mm
Height	23 mm
Weight	350 g